A-A-52022A
f. Protective gloves, disposable, large size.............. 4 pair g. Adhesive applicator...................... 2 each h. Protective mask....................... 2 each i. Resealable water resistant carrying case.............. 1 each J. Set of instructions...................... 1 each k. Degreaser/solvent cleaner with applicator....... not less than 4 fl oz.
(118.3 milliliters)
l. Mixing bowl (required if adhesive must be mixed by user)..... 2 each m. Razor knife........................ 2 each
3.6 Set of instructions. Instructions shall be provided on a weather resistant card or in a weather resistant pouch. In addition to the manufacturer's set of instructions, the pot life of the adhesive compound shall be listed at 45°F (7.2°C), 72°F (22.2°C), and 90°F (32.2°C). Also, the cure time of a repair at 45°F, 72°F, and 90°F shall be listed.
3.7 Carrying case. All contents of each repair outfit shall fit into one resealable water-resistant carrying case. Color of the carrying case shall be non-reflective tan. If the protective mask is made of paper it shall be packaged in a transparent virgin polyethylene sealed bag before being placed in the carrying case. In addition to any special marking, each carrying case shall be permanently marked with the following information:
a. Repair Outfit for Collapsible Tanks and Drums, Type I or II. b. NSN: (or CAGE)
c. MFR/PN: (manufacturers reference/part number)
d. Contract No.:
e. Date of Manufacture:
f. Expiration Date:
3.8 Shelf life. The contents of the repair outfit shall have a minimum shelf life of 4.5 years when stored at 72°F.
4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. PRODUCT CONFORMANCE. The products provided shall meet the salient characteristics of this CID, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. (see 7.3) The Government reserves the right to require proof of such conformance.
5.1 Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business