6 PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order (see 7.3).
7.1 Part or Identification Number (PIN). The following PIN (see 7.3) procedure is for Government purposes and does not constitute a requirement for the contractor. The PINs to be used for Repair Outfit Types, Collapsible Tanks And Drums (ROCTAD) acquired to this CID are created as follows: Example of reference part number: AA52022-1
AA 52022 - X
Repair Outfit Type (see 2)
1 - Type I
2 - Type II CID number
7.2 Source of documents.
7.2.2 ASTM D413, "Standard Test Methods for Rubber Property - Adhesion to Flexible Substrate" is available from ASTM International, PO Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 or website: https://www.astm.org .
7.2.3 MIL-DTL-83133 "Turbine Fuels, Aviation, Kerosene Types, NATO F-34(JP-8),
NATO F-35, And JP-8 + 100," and MIL-DTL-46162 "Fuel, Diesel, Referee Grade" are available from the Document Automation and Production Service, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094 or website: https://assist.daps.dla.mil/online/start/
7.2.4 NSF/ANSI Standard 61, "Drinking Water System Components - Health Effects" is available from National Sanitation Foundation International, P.O. Box 130140, 789 N. Dixboro Road, Ann Arbor, MI 48113-0140 or website: www.nsf.org .
7.3 Ordering data. The contract or order should specify the following:
a. Title, number and date of this CID.
b. Product performance provisions (see 5).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business